How does a thermostatic mixing valve work? - YouTube.
They work perfectly with the full range of thermostatic heads and actuators and their robust design ensures years of trouble-free performance. We produce Three-way valves that enable you to mix or divert the flow. Available with or without pre-setting of the flow rate capabilities, they also deliver optimal supply temperature control when used alongside IMI actuators.
Thermostatic valves are a simple and reliable control solution requiring neither electricity nor control air. With this complete variety of high quality items, we hope to be able to provide you and your company with the products you are looking for. If you cannot find the Thermostatic Valve you’re looking for or need any help please feel free to contact us, we will be more than glad to help.
A thermostatic mixing valve works much like a thermostat in your house. You set a desired temperature and the device opens or closes the hot water valve in order to maintain the proper temperature setting. In the case of our showers, the valve would only use the point-source water heater when necessary to attain the correct temperature thus decreasing the probability of wasted hot water and.
Removing the valve is a relatively easy job. If it is a single handle thermostatic valve, remove the nut which secures the valve and remove it. Soak the valve for up to 12 hours in the cleaning solution and replace it following the same process in reverse. Should a thermostatic valve which squeals when operated be replaced?
Thermostatic valve technology. Danfoss thermostatic valves are used for the infinite, proportional regulation of flow quantity depending on the setting and the sensor temperature. Because the valves constantly match flow quantity to demand, they are especially efficient for temperature control. The required temperature is maintained with no over-consumption of cooling water in cooling systems.
Thermostatic Control Valves utilize the principle of expanding wax, which in a semi-liquid state undergoes large expansion rates within a relatively narrow temperature range, The self-contained power element activates a stainless steel sliding sleeve which provides positive three-way valve action.
The thermostatic mixing valve was easy to install in my Winnebago View. The connectors were a perfect fit to my existing water lines and the shower hose was the correct size for the output on the valve. I made a mounting plate from thin white pvc cutting board using the old one as a template for screw locations, measured and cut holes for the valve, and attached the valve to it using thin.